View SLA6820M_797239.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SLA6820M Series
High Voltage 3-Phase Motor Drivers
Features and Benefits
Built-in pre-drive IC MOSFET power element CMOS compatible input (3.3 to 5 V) High-side gate driver using bootstrap circuit or floating power supply Built-in protection circuit for controlling power supply voltage drop Built-in overtemperature detection circuit (TD) Output of fault signal during operation of protection circuits Output current 1.5, 2, or 2.5 A Small SIP (SLA 24-pin)
Description
The SLA6820M inverter power module (IPM) series provides a robust, highly-integrated solution for optimally controlling 3-phase motor power inverter systems and variable speed control systems used in energy-conserving designs to drive motors of residential and commercial appliances. These ICs take 230 VAC input voltage, and up to 2.5 A (continuous) output current. They can withstand voltages of up to 500 V (MOSFET breakdown voltage). The SLA6820M power package includes an IC with all of the necessary power elements (six MOSFETs), pre-driver ICs (two), and flyback diodes (six), needed to configure the main circuit of an inverter. This enables the main circuit of the inverter to be configured with fewer external components than traditional designs. Applications include residential white goods (home applications) and commercial appliance motor control: * Air conditioner fan * Small ventilation fan * Dishwasher pump
Packages: Power SIP
Leadform 2171
Leadform 2175
Not to scale
Functional Block Diagram
VB 1 VB 2 VB3
VD VBB 1 VCC1 UVLO HIN1 HIN2 HIN3 COM1 U V W1 W2 Input Logic UVLO UVLO UVLO VBB 2
High Side Level Shift Driver
VCC2 VREG LIN1 LIN2 LIN3 COM2 FO 7.5V Reg. UVLO Input Logic Overtemperature Detection Low Side Driver
LS2 LS1
Figure 1. Driver block diagram
28610.18, Rev. 1
SLA6820M Series
Selection Guide
Part Number SLA6826M SLA6827M SLA6828M Packing 18 pieces per tube 18 pieces per tube 18 pieces per tube
High Voltage 3-Phase Motor Drivers
MOSFET Breakdown Voltage, VDSS(min) (V) 250 500 500
Output Current Continuous, IO(max) (A) 2 1.5 2.5 Pulsed, IOP (max) (A) 4 3 5
Absolute Maximum Ratings, valid at TA = 25C
Characteristic
MOSFET Breakdown Voltage Logic Supply Voltage Bootstrap Voltage Output Current, Continuous
Symbol
SLA6826M VDSS VCC VBS IO SLA6827M SLA6828M Between VCC and COM
Remarks
VCC = 15 V, ID = 100 A, VIN = 0 V
Rating
250 500 500 20 20 2 1.5 2.5 4
Unit
V V V V V A A A A A A mA V W C/W C C C
Between VB and HS (U,V, and W phases) SLA6826M SLA6827M SLA6828M SLA6826M
Output Current, Pulsed Output Current for Regulator Input Voltage Allowable Power Dissipation Thermal Resistance (Junction to Case) Case Operating Temperature Junction Temperature (MOSFET) Storage Temperature
IOP IREG VIN PD RJC TCOP TJ Tstg
SLA6827M SLA6828M
PW 100 s, duty cycle = 1%
3 5 35 -0.5 to 7 32.9 3.8 -20 to 100 150 -40 to 150
HINx and LINx pins TC = 25C All elements operating
Recommended Operating Conditions
Characteristic Main Supply Voltage Logic Supply Voltage Dead Time Junction Temperature Symbol SLA6826M VBB VCC tdead TJ SLA6827M SLA6828M Between VCC and COM Between VBB and LS Remarks Min. - - - 13.5 1.5 - Typ. 140 300 300 - - - Max. 200 400 400 16.5 - 125 Units V V V V s C
All performance characteristics given are typical values for circuit or system baseline design only and are at the nominal operating voltage and an ambient temperature, TA, of 25C, unless otherwise stated.
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
2
SLA6820M Series
Typical Application Diagram
High Voltage 3-Phase Motor Drivers
1
2
4
SLA6820M 11 10
3 5
VB1 VB2 VB3 VCC1 HO 1 HS1 24
HVIC 9 8 7 6
HO 2 HS2 13 M
HIN 1 HIN 2 HIN 3 COM1 HO 3 HS3 12 14
23
VCC 2
LO 1
MC U
20 19 18
LVIC LIN1 LIN2 LIN3 LO 2 17
LO 3 16 VREG 15
22 21
FO COM 2
15 V
NOTE: All of the input pins are connected to GND with internal pull-down resistors rated at 100 k, however, an external pull-down resistor may be required to secure stable condition of the inputs if high impedance conditions are applied to them. The external electrolytic capacitors should be placed as close to the IC as possible, in order to avoid malfunctions from external noise interference. Put a ceramic capacitor in parallel with the electrolytic capacitor if further reduction of noise susceptibility is necessary.
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
3
SLA6820M Series
High Voltage 3-Phase Motor Drivers
ELECTRICAL CHARACTERISTICS, valid at TA=25C, unless otherwise noted Characteristics Logic Supply Voltage Logic Supply Current Input Voltage Input Voltage Hysteresis Input Current Symbol VCC ICC VIH VIL VIhys IIH IIL VUVHL VUVHH Undervoltage Lock Out VUVHhys VUVLL VUVLH VUVLhys FO Terminal Output Voltage Overtemperature DetectionThreshold Temperature (Activation and Deactivation) Output Voltage for Regulator Bootstrap Diode Leakage Current Bootstrap Diode Forward Voltage Bootstrap Diode Series Resistor MOSFET Breakdown Voltage VFOL VFOH TDH TDL TDhys VREG ILBD VFBD RBD SLA6826M VDSS SLA6827M SLA6828M SLA6826M MOSFET Leakage Current IDSS SLA6827M SLA6828M SLA6826M MOSFET On State Resistance MOSFET Diode Forward Voltage MOSFET Diode Recovery Time RDS(on) VSD trr SLA6827M SLA6828M SLA6826M SLA6827M SLA6828M VCC = 15 V, VDS = 250 V, VIN = 0 V VCC = 15 V, VDS = 500 V, VIN = 0 V VCC = 15 V, VDS = 500 V, VIN = 0 V VCC = 15 V, ID = 1.5 A, VIN = 5 V VCC = 15 V, ID = 1 A, VIN = 5 V VCC = 15 V, ID = 1.5 A, VIN = 5 V ISD = 1.5 A, di / dt = 100 A/s ISD = 1 A, di / dt = 100 A/s ISD = 1.5 A, di / dt = 100 A/s VCC = 15 V, ID = 100 A, VIN = 0 V IREG = 35 mA, TC = -20C to 100C SLA6826M SLA6827M SLA6828M IF = 0.15 A VR = 250 V VR = 500 V VR = 500 V VCC = 15 V, no heatsink Between VCC and COM VCC = 15 V, IREG = 0 A VCC = 15 V, output on VCC = 15 V, output off VCC = 15 V High side, VCC = 15 V, VIN = 5 V Low side, VCC = 15 V, VIN = 0 V High side, between VBx and U, V, or W High side, hysteresis Low side, between VCC2 and COM2 Low side, hysteresis VCC = 15 V Conditions Min 13.5 - - 1.0 - - - 9.0 9.5 - 10.0 10.5 - 0 4.0 135 105 25 6.75 - - - - - 250 500 500 - - - - - - - - - - Typ 15 4 2.0 1.5 0.5 50 - 10.0 10.5 0.5 11.0 11.5 0.5 - - 150 120 30 7.5 5 5 - 1.1 22 - - - - - - 1.4 3.6 2.0 1.1 50 55 75 Max 16.5 6 2.5 - - 100 2 11.0 11.5 - 12.0 12.5 - 1.0 5.5 165 135 35 8.25 10 10 10 1.3 - - - - 100 100 100 1.8 4 2.4 1.5 - - - Units V mA V V V A A V V V V V V V V C C C V A A A V V V V A A A V ns ns ns
VCC = 15 V, ISD = 1.5 A, VIN = 0 V
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
4
SLA6820M Series
High Voltage 3-Phase Motor Drivers
SLA6826M SWITCHING CHARACTERISTICS, valid at TA=25C, unless otherwise noted Characteristics Symbol tdH(on) Switching Time, High Side trH tdH(off) tfH tdL(on) Switching Time, Low Side trL tdL(off) tfL VBB = 140 V, VCC = 15 V, ID = 1 A, 0 V VIN 5 V VBB = 140 V, VCC = 15 V, ID = 1 A, 0 V VIN 5 V Conditions Min - - - - - - - - Typ 650 100 370 10 600 100 300 10 Max - - - - - - - - Units ns ns ns ns ns ns ns ns
SLA6827M SWITCHING CHARACTERISTICS, valid at TA=25C, unless otherwise noted Characteristics Symbol tdH(on) Switching Time, High Side trH tdH(off) tfH tdL(on) Switching Time, Low Side trL tdL(off) tfL VBB = 300 V, VCC = 15 V, ID = 1.5 A, 0 V VIN 5 V VBB = 300 V, VCC = 15 V, ID = 1.5 A, 0 V VIN 5 V Conditions Min - - - - - - - - Typ 550 100 420 30 570 100 450 30 Max - - - - - - - - Units ns ns ns ns ns ns ns ns
SLA6828M SWITCHING CHARACTERISTICS, valid at TA=25C, unless otherwise noted Characteristics Symbol tdH(on) Switching Time, High Side trH tdH(off) tfH tdL(on) Switching Time, Low Side trL tdL(off) tfL VBB = 300 V, VCC = 15 V, ID = 2.5 A, 0 V VIN 5 V VBB = 300 V, VCC = 15 V, ID = 2.5 A, 0 V VIN 5 V Conditions Min - - - - - - - - Typ 650 130 540 50 690 150 590 50 Max - - - - - - - - Units ns ns ns ns ns ns ns ns
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
5
SLA6820M Series
High Voltage 3-Phase Motor Drivers
High Side Driver Input/Output Timing Diagrams
HIN
VUVHH
VB-HS
VUVHL
UVLO Release
HO
After UVLO is released, IC operation is started by the first rising edge of input
Low Side Driver Input/Output Timing Diagrams
LIN
VCC
VUVHH
VUVHL
UVLO Release
LO
FO
TDH
TDL
TJ
After UVLO is released, IC operation is started by the first rising edge of input
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
6
SLA6820M Series
High Voltage 3-Phase Motor Drivers
Pin-out Diagrams Leadform 2175
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Leadform 2171
Pad Side
1 3 5 7 9 11 13 15 17 19 21 23
2
4
6
8
10
12
14
16
18
20
22
24
Pad Side
Terminal List Table
Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Name VB1 VB2 VD VB3 VCC1 COM1 HIN3 HIN2 HIN1 VBB1 VBB2 W1 V W2 LS2 VREG LS1 LIN3 LIN2 LIN1 COM2 FO VCC2 U Function High side bootstrap terminal (U phase) High side bootstrap terminal (V phase) Bootstrap diode anode terminal High side bootstrap terminal (W phase) High side logic supply voltage High side logic GND terminal High side input terminal (W phase) High side input terminal (V phase) High side input terminal (U phase) Main supply voltage 1 (connect to VBB2 externally) Main supply voltage 2 (connect to VBB1 externally) Output of W phase (connect to W2 externally) Output of V phase Output of W phase (connect to W1 externally) Low side emitter terminal (connect to LS1 externally) Internal regulator output terminal Low side emitter terminal (connect to LS1 externally) Low side input terminal (W phase) Low side input terminal (V phase) Low side input terminal (U phase) Low side GND terminal Overtemperature detection fault-signal output terminal Low side logic supply voltage Output of U phase
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
7
SLA6820M Series
High Voltage 3-Phase Motor Drivers
Package Outline Drawing Leadform 2171
Dual rows, 24 alternating pins; vertical case mounting; pin #1 on tab side
Exposed heatsink pad 31.3 0.2 31 0.2 24.4 0.2 16.4 0.2 Gate protrusion O3.2 0.15 Gate protrusion 16 0.2 B 12.9 0.2 9.9 0.2 Branding Area 2.45 0.2 BSC 0.6 1.7 0.1 O3.2 0.15 4.8 0.2
5 0.5 9.5 +0.7 - 0.5
R1 REF
+0.15 0.5 - 0.05 4.5 REF
View A
0.6 +0.15 - 0.05
1.27 0.7 A
4.5 0.7
2
4
6
8
10
12
14
16
18
20
22
24
1
3
5
7
9
11
13
15
17
19
21
23 0.7 MAX
0.7 MAX A B Measured at pin tips To case top
Deflection at pin bend View A
Leadform: 2171 Terminal core material: Cu Terminal plating: Ni Recommended attachment: Solder dip (Sn-Ag-Cu) Dimensions in millimeters Branding codes (exact appearance at manufacturer discretion): 1st line, type: SLA682xM 2nd line, lot: YMDD# Where: Y is the last digit of the year of manufacture M is the month (1 to 9, O, N, D) DD is the date # is the tracking letter
Leadframe plating Pb-free. Device composition complies with the RoHS directive.
8
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
SLA6820M Series
High Voltage 3-Phase Motor Drivers
Package Outline Drawing Leadform 2175
Dual rows, 24 alternating pins; pins bent 90 for horizontal case mounting; pin #1 in outer row
Exposed heatsink pad 31.3 0.1 31 0.2 24.4 0.2 16.4 0.2 Gate protrusion O3.2 0.15 Gate protrusion 16 0.2 B 12.9 0.2 9.9 0.1 Branding Area 3 0.3 BSC 2.2 0.6 BSC 4.4 REF 0.6 +0.2 - 0.1 R1 REF 2.45 0.1 BSC 0.6 1.7 0.1 O3.2 0.15 4.8 0.2
View A
1.27 0.2 A
2.2 0.6 BSC
0.5 0.1
123 5 7 9 11 13 15 17 19 21 23 16 4 6 18 8 12 14 20 10 22 24
0.7 MAX A B Measured at pin exit from case To case top
0.7 MAX
Deflection at pin bend View A
Leadform: 2175 Terminal core material: Cu Terminal plating: Ni Recommended attachment: Solder dip (Sn-Ag-Cu) Dimensions in millimeters Branding codes (exact appearance at manufacturer discretion): 1st line, type: SLA682xM 2nd line, lot: YMDD# Where: Y is the last digit of the year of manufacture M is the month (1 to 9, O, N, D) DD is the date # is the tracking letter
Leadframe plating Pb-free. Device composition complies with the RoHS directive.
9
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
SLA6820M Series
High Voltage 3-Phase Motor Drivers
Packing Specification Leadform 2171
Dimensions in millimeters
31.2 580
13.8 X
Tube material: PVC Maximum 18 pieces per tube (pins aligned along X direction) Rubber plug each end
137
621
186
Z Y
Maximum 12 tubes in Y direction Maximum 3 tubes in Z direction Maximum pieces per carton: 18 pieces per tube 12 tubes per layer x 3 layers of tubes 648 pieces per carton
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
10
SLA6820M Series
High Voltage 3-Phase Motor Drivers
Packing Specification Leadform 2175
Dimensions in millimeters
31.0 580 Tube material: PVC Maximum 18 pieces per tube (pins aligned along X direction) Rubber plug each end X
15.8
130
610
185
Z Y
Maximum 10 tubes in Y direction Maximum 3 tubes in Z direction Maximum pieces per carton: 18 pieces per tube 10 tubes per layer x 3 layers of tubes 540 pieces per carton
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
11
SLA6820M Series
High Voltage 3-Phase Motor Drivers
WARNING -- These devices are designed to be operated at lethal voltages and energy levels. Circuit designs that embody these components must conform with applicable safety requirements. Precautions must be taken to prevent accidental contact with power-line potentials. Do not connect grounded test equipment. The use of an isolation transformer is recommended during circuit development and breadboarding.
Because reliability can be affected adversely by improper storage environments and handling methods, please observe the following cautions. Cautions for Storage * Ensure that storage conditions comply with the standard temperature (5C to 35C) and the standard relative humidity (around 40 to 75%); avoid storage locations that experience extreme changes in temperature or humidity. * Avoid locations where dust or harmful gases are present and avoid direct sunlight. * Reinspect for rust on leads and solderability of products that have been stored for a long time. Cautions for Testing and Handling When tests are carried out during inspection testing and other standard test periods, protect the products from power surges from the testing device, shorts between adjacent products, and shorts to the heatsink. Remarks About Using Silicone Grease with a Heatsink * When silicone grease is used in mounting this product to a heatsink, it shall be applied evenly and thinly. If more silicone grease than required is applied, it may produce stress. * Volatile-type silicone greases may permeate the product and produce cracks after long periods of time, resulting in reduced heat radiation effect, and possibly shortening the lifetime of the product. * Our recommended silicone greases for heat radiation purposes, which will not cause any adverse effect on the product life, are indicated below: Type G746 YG6260 SC102 Suppliers Shin-Etsu Chemical Co., Ltd. Momentive Performance Materials, Inc. Dow Corning Toray Silicone Co., Ltd.
Heatsink Mounting Method Torque When Tightening Mounting Screws. The recommended tightening torque for this product package type is: 58.8 to 78.4 N*cm (6.0 to 8.0 kgf*cm). Soldering * When soldering the products, please be sure to minimize the working time, within the following limits: 2605C 10 s 3805C 5s
*
Soldering iron should be at a distance of at least 1.5 mm from the body of the products
Electrostatic Discharge * When handling the products, operator must be grounded. Grounded wrist straps worn should have at least 1 M of resistance to ground to prevent shock hazard. Workbenches where the products are handled should be grounded and be provided with conductive table and floor mats. When using measuring equipment such as a curve tracer, the equipment should be grounded. When soldering the products, the head of soldering irons or the solder bath must be grounded in other to prevent leak voltages generated by them from being applied to the products. The products should always be stored and transported in our shipping containers or conductive containers, or be wrapped in aluminum foil.
* * *
*
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
12
SLA6820M Series
High Voltage 3-Phase Motor Drivers
The products described herein are manufactured in Japan by Sanken Electric Co., Ltd. for sale by Allegro MicroSystems, Inc. Sanken and Allegro reserve the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Therefore, the user is cautioned to verify that the information in this publication is current before placing any order. When using the products described herein, the applicability and suitability of such products for the intended purpose shall be reviewed at the users responsibility. Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products at a certain rate is inevitable. Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems against any possible injury, death, fires or damages to society due to device failure or malfunction. Sanken products listed in this publication are designed and intended for use as components in general-purpose electronic equipment or apparatus (home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Their use in any application requiring radiation hardness assurance (e.g., aerospace equipment) is not supported. When considering the use of Sanken products in applications where higher reliability is required (transportation equipment and its control systems or equipment, fire- or burglar-alarm systems, various safety devices, etc.), contact a company sales representative to discuss and obtain written confirmation of your specifications. The use of Sanken products without the written consent of Sanken in applications where extremely high reliability is required (aerospace equipment, nuclear power-control stations, life-support systems, etc.) is strictly prohibited. The information included herein is believed to be accurate and reliable. Application and operation examples described in this publication are given for reference only and Sanken and Allegro assume no responsibility for any infringement of industrial property rights, intellectual property rights, or any other rights of Sanken or Allegro or any third party that may result from its use.
The contents in this document must not be transcribed or copied without Sanken's written consent.
Copyright (c) 2008-2010 Allegro MicroSystems, Inc.
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
13
SLA6820M Series
High Voltage 3-Phase Motor Drivers
Worldwide Contacts
Asia-Pacific China Sanken Electric Hong Kong Co., Ltd.
Suite 1026, Ocean Centre Canton Road, Tsimshatsui Kowloon, Hong Kong Tel: 852-2735-5262, Fax: 852-2735-5494
Korea Sanken Electric Korea Co., Ltd.
Samsung Life Yeouido Building 16F 23-10, Yeouido-Dong, Yeongdeungpo-gu Seoul 150-734, Korea Tel: 82-2-714-3700, Fax: 82-2-3272-2145
Sanken Electric (Shanghai) Co., Ltd.
Room 3202, Maxdo Centre Xingyi Road 8, Changning District Shanghai, China Tel: 86-21-5208-1177, Fax: 86-21-5208-1757
Singapore Sanken Electric Singapore Pte. Ltd.
150 Beach Road, #14-03 The Gateway West Singapore 189720 Tel: 65-6291-4755, Fax: 65-6297-1744
Sanken Electric (Shanghai) Co., Ltd. Shenzhen Office
Room 1013, Xinhua Insurance Building Mintian Road, Futian District Shenzhen City, Guangdong, China Tel: 86-755-3391-9356/9358, Fax: 86-755-3391-9368
Europe Sanken Power Systems (UK) Limited
Pencoed Technology Park Pencoed, Bridgend CF35 5HY, United Kingdom Tel: 44-1656-869-100, Fax: 44-1656-869-162
Taiwan Sanken Electric Co., Ltd.
Room 1801, 18th Floor 88 Jung Shiau East Road, Sec. 2 Taipei 100, Taiwan R.O.C. Tel: 886-2-2356-8161, Fax: 886-2-2356-8261
North America United States Allegro MicroSystems, Inc.
115 Northeast Cutoff Worcester, Massachusetts 01606, U.S.A. Tel: 1-508-853-5000, Fax: 1-508-853-7895
Japan Sanken Electric Co., Ltd. Overseas Sales Headquarters
Metropolitan Plaza Building 1-11-1 Nishi-Ikebukuro, Toshima-ku Tokyo 171-0021, Japan Tel: 81-3-3986-6164, Fax: 81-3-3986-8637
Allegro MicroSystems, Inc.
14 Hughes Street, Suite B105 Irvine, California 92618, U.S.A. Tel: 1-949-460-2003, Fax: 1-949-460-7837
Allegro MicroSystems, Inc. 115 Northeast Cutoff Worcester, Massachusetts 01615-0036 U.S.A. 1.508.853.5000; www.allegromicro.com
14

▲Up To Search▲

Price & Availability of SLA6820M

	To Download SLA6820M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .